- 技術說明
- 尺寸參數
1、本產品主要用于水產品塊凍品解凍，從冷藏庫中出來的待加工的產品通過預解凍，然后后再通過解凍機解凍，從而達到后續工序要求；
2、解凍機工作原理：采用環境中的熱量，通過渦旋氣泵將環境中的熱量送入解凍槽內形成較大的氣泡，氣泡帶動水沖擊需要解凍物品，逐層將凍品解凍；
3、解凍后的產品隨輸送帶立刻輸送出去，未解凍的產品繼續解凍，從而到達需要解凍的產品解凍程度一致，確保產品品質；
4、在解凍過程中為低溫解凍，避免了產品變色，提高產品品質；
5、本產品設計理念先進，輸送部件可升降，便于衛生清理，完全滿足食品衛生要求；
6、超大排污口，排污更快捷、方便，大大節約清理時間；
7、電氣元器件采用進口施耐德品牌，安全可靠；
8、本解凍機解決了人工解凍耗時、浪費水、解凍不均勻的情況。
9、如需解凍效率更高，用戶可自行配置蒸汽源，我公司產品根據用戶現有資源進行定制設計，力求將用戶現有資源發揮到最好程度；
1.The product is mainly used to defrost frozen aquatic products. The products out of refrigerator to be processed will be firstly pre-defrosted and then defrosted by thawing machine in order to meet following processing requirements;
2.Working principle of thawing machine: Ambient heat is sent to thaw slot via vortex pump to form larger bubbles, which drive water to wash products to be defrosted so as to defrost them layer by layer;
3.Defrosted products are immediately sent out via conveyor and frozen products are continuously defrosted in order to meet defrosted product requirements and ensure product quality;
4.Defrosting process is carried out under low temperature in order to avoid discoloration of products and improve product quality;
5.The product is designed with advanced concept and transmission part can be raised or lowered for convenient cleaning in order to meet food hygiene requirements;
6.Large drain outlet is used for quick and convenient drainage and a large amount of cleaning time is saved;
7.Schneider electrical components are used to provide sufficient safety;
8.The thawing machine solves time consuming, water wasting and uneven thawing problems of manual defrosting.
9.If higher defrosting efficiency is required, users can use steam source. Our products can be customized according to existing resources available to users in order to maximize their applications;
